Clymer Mercury/Mariner 2.5-60 HP Two-Stroke Outboards (Includes Jet Drive Models) 1994-1997

Clymer Mercury/Mariner 2.5-60 HP Two-Stroke Outboards (Includes Jet Drive Models) 1994-1997


  • Chapter seven, ignition and electrical systems. Battery, Battery charging system, Fuses, Starting systems, Ignition systems, Capacitor discharge ignition (2.5, 3.3 4 and 5 hp), Alternator driven capacitor discharge ignition (6-60 hp and 30 and 45 Jet), Capacitor discharge module (CDM) ignition.
  • Chapter nine, lower gearcase and jet drive unit. Lower gearcase, Gear case operation, Gear ratio, High-altitude operation, Service precautions, Corrosion control, Gearcase lubrication, Propeller, Trim tab adjustment, Gear housing, Water pump, Gearcase disassembly, assembly, Jet drive models, Jet pump unit maintenance, Jet pump unit service, Bearing housing, Water intake housing liner.
  • Chapter eleven, oil injection system. Autoblend II injection system, Constant-ratio oil injection–40 hp and 30 Jet (4-cylinder), Variable-ratio oil injection. Chapter twelve, manual rewind starter and remote control. Manual rewind starters, Remote controls. Box Dimensions: 1″H x 8″W x 11″L. Weight: 3.5lbs.
  • Chapter eight, power head. Power head break-in, Lubricants, sealant and adhesives, Sealing surfaces, Fasteners and torque, Removal installation, Disassembly, Cleaning and inspection, Assembly.
  • Chapter ten, power trim and tilt systems and power steering system. Trim and tilt systems, Manual tilt systems, Power trim and tilt systems, Power trim and tilt system service.

Mercury/Mariner 2.5 – 60 HP Two-Stroke Outboards (Includes Jet Drive Models), 1994-1997. Part Num: B723. 712 pages. Chapter three, troubleshooting. Safety precautions, Operating requirements, Test and repair equipment, Starting system, AC alternating current lighting coil, Battery charging system, Electrical accessories, Ignition system, Capacitor discharge ignition (2.5, 3.3, 4 and 5 hp), Alternator driven ignition (electronic advance [20-25 hp and 20 Jet]), Alternator drive ignition (mechanica
More Info & Customer Reviews – CLICK HERE


mariner outboard motor

AZN2.2

More Mariner Outboard Motor Products

47-11590M 18-3066 Boat engine impeller for Mercury Mariner 6HP 8HP 6C 6D 8C outboard motors

47-11590M 18-3066 Boat engine impeller for Mercury Mariner 6HP 8HP 6C 6D 8C outboard motors

$ 11.99

  • Number of Blades: 6, Net Weight: 9g
  • Plastic Hub
  • Height: 17.85mm
  • External Impeller Overall Diameter: 39.56mm
  • Internal Shaft Insert Diameter: 11.80mm

Replacement:
This aftermarket Impeller replace Mercury Mariner outboard motors 47-11590M ,Sierra 18-3066 ;
Yamaha outboard motor part 6G1-44352-00-00.OEM part for references only

Applications:
(1)Mercury Mariner Outboard Motors:
6C 6HP Mariner Serial Numbers: 6H8-000317 THRU 010381
6C 6HP Mariner Serial Numbers: 6H8-010382 AND UP
6C 6HP Mariner Serial Numbers: 6H8-300171 THRU 306502
6C 6HP Mariner Serial Numbers: 6H8-306503 AND UP
6D 6HP Mariner Serial Num
More Info & Customer Reviews – CLICK HERE


mariner outboard motor

$ 11.99

AZN2.2

Related Mariner Outboard Motor Products

Boat engine impeller 19210-ZV7-003 18-3249 for honda marine 4-Stroke 20hp 25hp 30hp outboard motor water pump (3 cyl)

Boat engine impeller 19210-ZV7-003 18-3249 for honda marine 4-Stroke 20hp 25hp 30hp outboard motor water pump (3 cyl)

$ 13.33

  • Number of Blades: 6
  • Height: 20.20mm
  • External Impeller Overall Diameter: 55.58mm
  • Internal Shaft Insert Diameter: 16.83mm
  • Net Weight: 21g

Boat Engine Impeller 19210-ZV7-003 for Honda Marine 4-Stroke 20HP 25HP 30HP Outboard Motor Water Pump (3 cyl)

Descriptions:
This aftermarket Impeller replace Honda outboard motors 19210-ZV7-003 , Sierra 18-3249.

Applications(Honda Outboard motors):
YEAR Model
Pre-1997 BF25A
Pre-1997 BF30A
1998 BF25AW
1998 BF30AW
1999 BF25AX
1999 BF30AX
2000 BF25AY
2000 BF30AY
2001 BF25A1
2001 BF30A1
2002 BF25A2
2002 BF30A2
2003 BF25A3<br
More Info & Customer Reviews – CLICK HERE


mariner outboard motor

AZN2.2

Related Mariner Outboard Motor Products

47-89984 47-89984T4 47-80363 1T 47-F694065 47-30221 18-3017 Boat Engine Impeller for Mercury Mercruiser 75-225hp outboard motors

47-89984 47-89984T4 47-80363 1T 47-F694065 47-30221 18-3017 Boat Engine Impeller for Mercury Mercruiser 75-225hp outboard motors

$ 13.63

  • Number of Blades: 6, Brass Hub
  • Height: 17.82mm
  • External Impeller Overall Diameter: 51.41mm
  • Internal Shaft Insert Diameter: 11.11mm
  • Net Weight: 95g

Applications
75hp 3 Cyl 6432901 & Later
75hp 4 Cyl 6432901 & Later
800 (80hp) 6 Cyl 1398630-1566239
800 (80hp) 4 Cyl 2559001-3493912
80hp 4 Cyl 4831999-6432900
850 (85hp) 6 Cyl 1460999-1766823
850 (85hp) 4 Cyl 3493913-4831998
900 (90hp) 1766824-1869775
90hp 6 Cyl 4845301 & Later
950 (95hp) 6 Cyl 1869776-2318585
1000 (100hp) 1464949-3253111
105 Jet 0D082000 & Later
1100 (110hp) 1870204-2314955
1150 (115hp) 2836019-4394236
1
More Info & Customer Reviews – CLICK HERE


mariner outboard motor

AZN2.2

Find More Mariner Outboard Motor Products

Starter Mercury Mariner Marine Outboard 75HP 90HP 100HP 115HP 125HP 75ELHPTO 90ELHPTO 100ELXLPTO 115ELPTO 50-66015-1

Starter Mercury Mariner Marine Outboard 75HP 90HP 100HP 115HP 125HP 75ELHPTO 90ELHPTO 100ELXLPTO 115ELPTO 50-66015-1


  • New Aftermarket Part (Not Rebuilt/Refurbished/Repurposed)
  • Replaces: MERCURY MARINE 50-66015-1, 50-66015-3, 50-66015T, 50-66015T-1 UNITED TECHNOLOGIES 4886540-M030SM, SM48865
  • Please verify this is the right part number before ordering

Models:

Mariner Marine

1988-1993 100ELPTO 1.7L 105ci 100 HP
1994-2000 100ELPTO 1.9L 113ci 100 HP
1988-1989 100ELXLPTO 1.7L 105ci 100 HP
1998-2000 100EXLHPTO 1.9L 113ci 100 HP
1989-1993 115ELPTO 1.7L 105ci 115 HP
1994-2001 115ELPTO 1.9L 113ci 115 HP
1999-2001 115ELPTO Coastal 1.9L 113ci 115 HP
1995-2001 115ELPTO Jet 80 1.9L 113ci 80 HP
2000-2001 115ELPTO Saltwater 1.9L 113ci 115 HP
1989-1993 115EXLPTO 1.7L 105ci 115HP
1994-2001 115EXLPTO 1.
More Info & Customer Reviews – CLICK HERE


mariner outboard motor

$ 67.75

AZN2.2

More Mariner Outboard Motor Products

Starter Mercury Mariner Marine Outboard 50HP 60HP 70HP 80HP 85HP 90HP Engines 50-65436 50-66015 SM09964

Starter Mercury Mariner Marine Outboard 50HP 60HP 70HP 80HP 85HP 90HP Engines 50-65436 50-66015 SM09964

$ 52.00

  • New Aftermarket Part (Not Rebuilt/Refurbished/Repurposed)
  • Mariner Marine50ELO, 50ELPTO, 60EL, 60ELO, 60ELPT, 60ELPTO, 70E, 70EL, 90ELHPTO, 90ELO, 90ELPTO
  • Mercury Marine50ELO, 50ELPTO, 60E, 60EL, 60ELO, 60ELPT, 60ELPTO, 70E, 70EL, 70ELPT, 70HP, 80ELPT
  • 50HP, 60HP, 70HP, 80HP, 85HP, 90HP
  • Please verify this is the right part number before ordering

Models:

MARINER Marine, ENGINES – MARINE OUTBOARD

1986 50ELO 49.8ci – 50 H.P.

1986 50ELPTO 49.8ci – 50 H.P.

1984-1985 60EL 49.8ci – 60 H.P.

1986 60ELO 49.8ci – 60 H.P.

1984-1985 60ELPT 49.8ci – 60 H.P.

1986 60ELPTO 49.8ci – 60 H.P.

1979 70E 49.8ci – 70 H.P.

1979-1983 70EL 49.8ci – 70 H.P.

1991-1993 90ELHPTO 1.2L – 71.1ci – 90 H.P.

1994-1999 90ELHPTO 1.4L – 84.6ci – 90 H.P.

1987-1988 90ELO 1.2L – 71.1ci
More Info & Customer Reviews – CLICK HERE


mariner outboard motor

AZN2.2

More Mariner Outboard Motor Products

825212 825212001 825212T02 855676 855676003 855676A1 18-3541 Boat Motor Thermostat for Mercury Mariner 4-Stroke 8HP – 90HP Outboard Engine

825212 825212001 825212T02 855676 855676003 855676A1 18-3541 Boat Motor Thermostat for Mercury Mariner 4-Stroke 8HP – 90HP Outboard Engine

$ 23.69

  • Overall diameter of top black seal: 27.00mm
  • Overall length of the thermostat: 33.60mm
  • Temperature: 60C (140F)
  • Condition: New
  • All parts are available in stock, we can ship it out within 1-2 business days!

825212 825212001 825212T02 855676 855676003 855676A1 18-3541 Boat Motor Thermostat for Mercury Mariner 4-Stroke 8HP – 90HP Outboard Engine

Replacement:
This thermostat replaces Mercury Mariner 825212 825212001 825212T02 855676 855676003 855676A1 18-3541.

Dimensions:
Overall diameter of top black seal: 27.00mm
Overall length of the thermostat: 33.60mm
Temperature: 60C (140F)
Condition: New
All parts are available in stock, we can ship it out within 1-2 busi
More Info & Customer Reviews – CLICK HERE


mariner outboard motor

$ 23.69

AZN2.2

Find More Mariner Outboard Motor Products

Intex Composite Boat Motor Mount Kit for Inflatable Boats – 68624E

Intex Composite Boat Motor Mount Kit for Inflatable Boats – 68624E


  • Challenger 3
  • Seahawk 2, 3 and 4
  • Seahawk II
  • Excursion 3, 4, and 5
  • Mariner 3 and 4

The INTEX Motor Mount Kit fits all inflatable INTEX boats with mount fittings on the rear of the boat. The Motor Mount Kit attaches in minutes and expands the capability of your inflatable boat. Effortlessly cruise across the water with motors up to 3.5 horsepower. When you’re finished, the INTEX Motor Mount Kit detaches and disables in minutes for easy storage and transportation. Attaches in minutes to any INTEX inflatable boat with rear mount fittings such as: – Challenger 3 – Seahawk 2, 3 and
More Info & Customer Reviews – CLICK HERE


mariner outboard motor

$ 23.74

AZN2.2

More Mariner Outboard Motor Products

Impeller 47-85089-3 47-85089-10 18-3057 for Mercury Mariner Chrysler Force 18HP 20HP 25HP 30HP 40HP 45HP 50HP 75HP Outboards

Impeller 47-85089-3 47-85089-10 18-3057 for Mercury Mariner Chrysler Force 18HP 20HP 25HP 30HP 40HP 45HP 50HP 75HP Outboards

$ 13.00

  • Number of Blades: 6, Brass Hub
  • Height: 12.21mm
  • External Impeller Overall Diameter: 73.39mm
  • Internal Shaft Insert Diameter: 15.98mm
  • Net Weight: 40g

Applications :
(1)Chrysler/Force Outboard models:
25hp (1996-98) serial# E127700-E344999
40/50hp (1995-99) serial# E093700-E369299
75hp (1999) serial# E345000-up
(2)Mercury/Mariner outboard models:
18hp serial# 5837437-up
20hp serial#6443973-up
25, 25XD, 25 Sea Pro serial# 5705532-up
25 (3cyl.) E268781-up
30 Jet serial# G590000-up
30 (2cyl) serial# G053314-up
40 (2 cyl) serial# G053314-up
40 (3cyl) serial# G531301-up
40 (4-stroke,std) seria
More Info & Customer Reviews – CLICK HERE


mariner outboard motor

$ 13.00

AZN2.2

Related Mariner Outboard Motor Products

Db Electrical Sab0079 Starter For Mercury Mariner Outboard 75 90 100 110 115 125 Hp 1989-2004,50-66015-1, 50-66015-3, 50-66015T, 5392 Mot3004 18-5610 4886540-M030Sm, Sm48865

Db Electrical Sab0079 Starter For Mercury Mariner Outboard 75 90 100 110 115 125 Hp 1989-2004,50-66015-1, 50-66015-3, 50-66015T, 5392 Mot3004 18-5610 4886540-M030Sm, Sm48865

$ 58.70

  • 100% Brand New Aftermarket Unit
  • NOT Remanufactured
  • 1-Year Warranty
  • Meets or Exceeds OEM Specs for Fit and Performance

MARINER Engines – Marine Outboard 100ELPTO 1988 1.7L – 105ci – 100 HP
MARINER Engines – Marine Outboard 100ELPTO 1989 1.7L – 105ci – 100 HP
MARINER Engines – Marine Outboard 100ELPTO 1990 1.7L – 105ci – 100 HP
MARINER Engines – Marine Outboard 100ELPTO 1991 1.7L – 105ci – 100 HP
MARINER Engines – Marine Outboard 100ELPTO 1992 1.7L – 105ci – 100 HP
MARINER Engines – Marine Outboard 100ELPTO 1993 1.7L – 105ci – 100 HP
MARINER Engines – Marine Outboard 100ELPTO 1994 1.9L – 113ci –
More Info & Customer Reviews – CLICK HERE


mariner outboard motor

$ 58.70

AZN2.2

Related Mariner Outboard Motor Products

Mercury Optimax /DFI 2-Cycle Outboard Oil 1 Gallon 92-858037K01

Mercury Optimax /DFI 2-Cycle Outboard Oil 1 Gallon 92-858037K01

$ 35.16

  • Mercury Optimax/DFI oil is recommended for use in Mercury and Mariner Optimax and direct fuel injected DFI 2-cycle outboards
  • Maximizes the performance of Mercury and Mariner Optimax and DFI engines where reduced oiling rates and higher operating temperatures put increased demands on lubricants
  • Synthetic additives provide increased lubricity and resistance to scuffing

A synthetic blend 2-cycle engine oil specifically formulated and developed to meet the needs of: optimax and direct fuel injected (dfi) 2-cycle Outboard engines. Provides the maximum protection for optimax and dfi engines even under the most extreme operating conditions. Outperforms other oils by combining a carefully modified base stock blend with a synthetic additive package. Minimizes carbon build-up to help maintain engine top end speed and acceleration. Superior lubrication for increased re
More Info & Customer Reviews – CLICK HERE


mariner outboard motor

AZN2.2

More Mariner Outboard Motor Products

New Discount Starter and Alternator 5389N Replacement Starter Fits Mercury Mariner Marine Outboard 135HP 150HP 175HP 200HP

New Discount Starter and Alternator 5389N Replacement Starter Fits Mercury Mariner Marine Outboard 135HP 150HP 175HP 200HP

$ 61.00

  • New Aftermarket Part (Not Rebuilt/Refurbished/Repurposed)
  • OEM(s): Mercury Marine, Johnson Electric Type: PMDD Voltage: 12 Volts Rotation: CCW Teeth/Splines: 8 Teeth/Splines Pinion/Splines OD: 26.9mm / 1.059in Mounting Hole 1: 4.9mm ID Unthreaded Approximate Weight: 9.585 lbs / 4.36 kg
  • Replaces: API MARINE MOT3008 ARCO MARINE 5380 JOHNSON ELECTRIC 4820440, 4820540, SM48204, SM48205 MERCURY MARINE 50-44415, 50-79472, 50-79472-1, 50-79472T2, 50-884238T, 50-44414, 50-77141 UNITED TECHNOLOGIES 1718328-M030SM, 4820540-M030SM, SM17183, SM48205
  • Please verify this is the right part number before ordering

Models:

MARINER Marine, ENGINES – MARINE OUTBOARD
135CXL 2.0L – 121.9ci – 135 H.P. 1993-2000
135ELPTO 2.0L – 121.9ci – 135 H.P. 1986-1988
135EXLPTO 2.0L – 121.9ci – 135 H.P. 1986-1988
135L 2.0L – 121.9ci – 135 H.P. 1989-2000
135XL 2.0L – 121.9ci – 135 H.P. 1989-2000
150 Magnum EFI 2.5L – 153.0ci – 150 H.P. 1992-1998
150 Magnum II 2.5L – 153.0ci – 150 H.P. 1989-1991
150 Magnum III 2.5L – 153.0ci – 150 H.P. 1994-2000
150CXL 2.0L – 121.9ci – 150 H.P. 1989-1998
More Info & Customer Reviews – CLICK HERE


mariner outboard motor

$ 61.00

AZN2.2

More Mariner Outboard Motor Products

Boat Engine Impeller 389576 0389576 18-3091 for Johnson Evinrude OMC BRP 4HP 4.5HP 5HP 6HP 8HP 2-Stroke Outboard Motor

Boat Engine Impeller 389576 0389576 18-3091 for Johnson Evinrude OMC BRP 4HP 4.5HP 5HP 6HP 8HP 2-Stroke Outboard Motor

$ 12.98

  • Number of Blades: 6, Brass Hub
  • Height: 17.55mm
  • External Impeller Overall Diameter: 38.08mm
  • Internal Shaft Insert Diameter: 11mm
  • Net Weight: 34g

Applications(Johnson Evinrude outboard motors ) :
4hp Deluxe (2-stroke) 1980-97
4.5hp (2-stroke) 1980-97
5hp (4-stroke) 1998 & Up
6hp (4-stroke) 1998 & Up
8hp (2-stroke) 1986-97

This part is new and available in stock !
More Info & Customer Reviews – CLICK HERE


mariner outboard motor

AZN2.2

More Mariner Outboard Motor Products

Universal Outboard Boat Engine Motor Flusher Round Muff Cups – Five Oceans

Universal Outboard Boat Engine Motor Flusher Round Muff Cups – Five Oceans

$ 14.03

  • Extend your outboard engine’s life by regularly flushing out salt, silt and grime
  • Clamp over water intake then flush outboard with a garden hose
  • Product is 100% Brand new
  • Round PVC muffs
  • Marine-Grade Black epoxy coated spring steel frame

MARINE UNIVERSAL OUTBOARD MOTOR FLUSHER FOR BOAT ENGINE; ROUND MUFF CUPS- FIVE OCEANS Outboard Motor Flusher with Round Cups Extend your outboard engine’s life by regularly flushing out salt, silt, grime, etc. Clamping this Five Oceans´ flusher over your engine’s water intake on the lower unit and fresh water from a hose is all you need. It’s great for tune-ups and other maintenance that requires running an outboard engine out of the water. > Extend your outboard engine’s life by regularly flus
More Info & Customer Reviews – CLICK HERE


mariner outboard motor

$ 14.03

AZN2.2

Find More Mariner Outboard Motor Products

Intex Mariner 4, 4-Person Inflatable Boat Set with Aluminum Oars and High Output Air Pump (Latest Model)

Intex Mariner 4, 4-Person Inflatable Boat Set with Aluminum Oars and High Output Air Pump (Latest Model)

$ 228.99

  • The strong molecular structure of this plastic makes it highly resistant to damage from abrasion, impact and sunlight.
  • Four Boston valves on main hull chamber for quick-fills and fast-deflations.
  • The keel is inflatable; this results in improved control and handling.
  • A durable rock guard lines the circumference of the hull above which an all-around nylon grab line circles the upper hull.
  • Weight Capacity: 880 Lbs. (400 kg) – Inflated Dimensions: 129″ x 57″ x 19″ (328 x 145 x 48cm).

Ideal for a relaxed, low key day on the lake or easy river, the US Coast Guard-approved Intex Mariner 4 has room for four — with two fishing rod holders, if you’d like to try and catch your lunch — and four rapidly inflating chambers. Made of Super-Tough PVC material, the Mariner 4 is durable enough to stand up to years of heavy use, and deflates and packs down quickly for easy transport. Features

• Four-person raft measures 57 by 19 by 129 inches (W x H x D)
• 880-po
More Info & Customer Reviews – CLICK HERE


mariner outboard motor

AZN2.2

Related Mariner Outboard Motor Products

1 2 3